GMDM-I Multi-Jet Water Meter

  • water meter

GMDM-I Multi jet water meter, super dry pre-equipped for inductive modules

GMDM-I Multi-jet water meter, dry dial, magnetic transmission with 360° rotating lid.

Water meter versions for cold water (50°C) and hot water (90°C).Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output. 

The GMDM-I Multi-jet is a reliable and versatile meter for low flow rate applications and comes with MID and WRAS approvals. 

A1″ BSP (DN25) Multi jet cold water meter.
Nominal flow Q3 = 6.3m3/h.
Optional Pulse, M-Bus or wireless M-Bus output.
Length = 260mm without unions, 380mm with unions.
Maximum Temperature = 50 Deg. C.
Unions & washers included.
Horizontal or Vertical installation.
High quality – Manufactured in Italy

Available in sizes DN15 – 1/2” and DN50 2” for both cold water from 0° to 50°C and hot water from 30° to 90°C.

Approved according to MID 2004 /22/CE up to the range R160-H/R50-V.

ISO 4064 and OIML R49 compliant

The GMDM-i multi jet water meter range, manufactured in Europe (Italy), is a direct replacement water meter to the following models:-

  • Aquamotion S15MJC, S20MJC, S25MJC, S30MJC, S40MJC & S50MJC. Made by Ningbo in China.
  • Delta Flowtech D15SJ, D20SJ. Made in China.
  • 15MKSJ, 20MKSJ.
  • 302003, 302004, 302009, 302010. Made by Ningbo in China.

For more information on Flowquip’s wide range of water meters, click here 

Should you need to hire a flow meter, this can be done through our sister company Flowhire Ltd